Holley Terminator X LS EFI System- 24x and 58x LS1, LS2, LS3, LS6, LS7 & Truck, Drive by Cable - 58x Gen 4 / EV6 aka USCAR

We finally have some inventory of Terminator X & X Max LS kits. Please contact us with the part number you're after, if you need to check availability. THIS PRODUCT PAGE IS ONLY FOR TERMINATOR X LS KITS. IF YOU HAVE DRIVE BY WIRE THROTTLE BODY, OR A 4L/6L AUTOMATIC TRANSMISSION, OR BOTH, YOU WILL NEED TO STEP UP TO THE "TERMINATOR X MAX" KITS.    Features and Benefits Plug and play LS engine control On-Board Diagnostic LEDS for: ECU Power – Engine Run – Wideband Status – TPS Calibration – Crank Signal – Cam Signal. Allow you to identify any Critical engine issues at a glance MAP Sensor vacuum hose adapters (1/8th – ¼ and 3/16ths) Genuine Bosch LSU 4.9 Wideband Control (Will not work with LSU 4.2 Oxygen Sensors) 4 Inputs – 12v, Ground, 5v, and Frequency, for things such as additional pressure sensors, or activation triggers for nitrous activation, or a trans brake (Fuel and Oil Pressure Inputs are pre-terminated) 4 Outputs – Ground, PWM - , for accessories such as; fans, boost control, nitrous control, IAC Kit, and More Boost Control – Boost vs Time, Boost vs Gear, Boost vs RPM, Boost vs Speed, Boost Safeties Nitrous Control – Single Channel of Wet or Dry, Progressive or Non-Progressive, Rich/Lean Safeties, and target Closed Loop AFR Advanced Tables – 4x 1D Tables, 1x 1D per Gear Table, 4x 2D Tables, 1x 2D per Gear Table Integrated Datalogging to the 3.5” Handheld SD Card Free EFI Tuning Software for complete control of your Terminator X power plant APPLICATIONS: LS1/6/Early LS2, 24X =1997+ LS1/2/6 APPLICATIONS USING AN EV1 INJECTOR, 24X CRANK RELUCTOR, 1X CAM GEAR, AND DRIVE BY CABLE ONLY. TRUCK 4.8-6.0L / 24X =PRE 2007 APPLICATIONS USING A MULTEC INJECTOR, 24X CRANK RELUCTOR, 1X CAM GEAR, AND DRIVE BY CABLE ONLY. LS3 / 58X =LS3/LS7 & 07+ TRUCK APPLICATIONS USING AN EV6 INJECTOR, 58X CRANK RELUCTOR, 4X CAM GEAR, AND DRIVE BY CABLE ONLY (WILL NOT OPERATE FACTORY DRIVE BY WIRE LS3 THROTTLE BODIES!!! USE TERMINATOR X MAX FOR DBW. Part numbers: 24x / EV1 / DBC: 550-903 24x / Multec / DBC: 550-904 24x / EV6 / DBC: 550-909 58x / EV1 / DBC: 550-910 58x / Multec: (Not a valid PN but can be done using a different injector harness or adapters)  58x / EV6 / DBC: 550-905