{"title":"Expansion Module","description":null,"products":[{"product_id":"dakota-digital-bim-01-2-module-for-obdii","title":"Dakota Digital BIM-01-2 Module for OBDII","description":"The BIM-01-2 OBD-II (J1850\/CAN) Interface allows you to plug directly into the engine diagnostic port, extracting engine and transmission data from the vehicle's computer (ECM). The BIM-01-2 will collect and output the following information to Dakota Digital Instrument Systems *:\nAvailable on most vehicles (see below):***SpeedometerTachometerEngine TemperatureCheck Engine Indicator\nVehicle specific:****Intake Air TemperatureTransmission TemperatureAmbient Air TemperatureGear PositionOil PressureBoost Pressure\nDue to the various factory and modified ECM's, additional data including (Intake Temp, Transmission Temp, Ambient Air Temp, Oil Pressure, and Gear Position) may be available, but will vary from application to application. Dakota Digital cannot guarantee the presence or accuracy of the Coolant Temp, Intake Temp, Transmission Temp, Ambient Air Temp, Oil Pressure, Boost or Gear Position displays since this is a function of the ECM and matching OEM functional sensors.\n*The BIM-01-2 is designed to decode the information provided by the ECM through OBD-II and supply this information to the RTX, HDX, VHX and VFD3 systems with a black plastic control module. For any BIM-compatible control boxes which contain the 3.5mm headphone jack BIM input, add part number 394193 adaptor harness.   Earlier instrument systems with an aluminum control module are not capable of BIM connectivity\n**The BIM-01-2 is designed for J1850 and CAN OBD protocols only. Compatible with OBDII protocols SAE J1850 VPW, SAE J1850 PWM and ISO 15765 CAN 500k 11 bit identifiers that follow the SAE J1979 PID protocol.Does not function with Bosch-built ECUs, found in 2004-2007 Duramax applications.\nIf you are concerned about compatibility with your vehicle please contact our sales or tech department.****GM Connect \u0026amp; Cruise packages do not transmit the gear position data, preventing the BIM-01-2 from acquiring this information.","brand":"My Store","offers":[{"title":"Default Title","offer_id":67611476689212,"sku":"BIM-01-2","price":133.0,"currency_code":"USD","in_stock":true}]},{"product_id":"dakota-digital-bim-01-2-hlly-module-for-holley-efi","title":"Dakota Digital BIM-01-2-HLLY Module for Holley EFI","description":"\u003cp\u003eThe BIM-01-2-HLLY is designed to read the engine information from the Holley Terminator (including X and X Max),  HP, Sniper Gen 1, or Dominator EFI kits. The BIM-01-2-HLLY module is a direct plug in using the supplied 2 or 4 pin harness for simple connection to the Holley EFI system.\u003cbr\u003e\nThis does NOT fit Sniper Generation 2 with m8 CAN Connector.\u003cbr\u003e\n \u003cbr\u003e\nThe BIM-01-2-HLLY will collect and output the following information to Dakota Digital Instrument Systems *:\u003cbr\u003e\nAlways available:\u003cbr\u003e\nTachometer\u003cbr\u003e\nEngine Coolant Temp\u003cbr\u003e\nIntake\/ Manifold Temp.\u003cbr\u003e\nAir\/ Fuel Ratio\u003cbr\u003e\nMAP\u003cbr\u003e\nPlease note: Due to the various factory and modified ECM's, additional data add-on's from Holley may be available such as Vehicle Speed, Oil Pressure, Fuel Pressure and Boost. Dakota Digital cannot guarantee the presence or accuracy of the Coolant Temp., Intake Temp., Fuel Pressure, or Air\/ Fuel ratio displays since this is a function of the ECM and matching OEM functional sensors.\u003cbr\u003e\n*The BIM-01-2-HLLY is designed to decode the information provided by the Holley Terminator (X and X MAX with BIM-01-2-HLLY produced after 6\/13\/2019), Sniper (Sniper with BIM-01-2-HLLY produced after 2\/1\/2018) HP and Dominator EFI's and supply this information to the VFD3 rev. G, VHX, RTX and HDX control box instrument systems only. \u003cbr\u003e\n**Compatible Dakota Digital instrument system: VHX, HDX, RTX and VFD3 systems with a black plastic control module. For any BIM-compatible control boxes which contain the 3.5mm headphone jack BIM input, add part number 394193 adaptor harness.   Earlier instrument systems with an aluminum control module are not capable of BIM connectivity.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":67611476721980,"sku":"BIM-01-2-HLLY","price":133.0,"currency_code":"USD","in_stock":true}]},{"product_id":"dakota-digital-bim-01-2-aces-module-for-aces-efi-killshot-etc","title":"Dakota Digital BIM-01-2-ACES Module for Aces EFI - Killshot Etc.","description":"\u003cp\u003eThe BIM-01-2-ACES is designed to read the engine information from the ACES CAN bus. The BIM-01-2-ACES module is a direct plug in using the supplied 4 pin harness for simple connection to the ACES system.\u003cbr\u003e\nThe BIM-01-2-ACES will collect and output the following available (depending upon ACES application and add-ons selected) readings to Dakota Digital Instrument Systems*:\u003cbr\u003e\nAlways available:\u003cbr\u003e\nTachometerEngine Coolant TempOil PressureIntake\/ Manifold Temp.Fuel PressureAir\/ Fuel RatioMAP\/ Boost\u003cbr\u003e\nPlease note: Due to the various ECM's, additional data add-on's from ACES may be available such as Vehicle Speed, and Transmission Temp.  Dakota Digital cannot guarantee the presence or accuracy of the Coolant Temp., Intake Temp., Fuel Pressure, or Air\/ Fuel ratio displays since this is a function of the ECM and matching ACES functional sensors.\u003cbr\u003e\n*The BIM-01-2-ACES is designed to decode the information provided by the  Killshot, Jackpot Pro and QuickDraw kits and supply this information to the VFD3, VHX, HDX, RTX and GRFX control box instrument systems only.  Information present is dependent on ACES application and add-ons selected.  \u003cbr\u003e\n**Compatible Dakota Digital instrument system: GRFX, RTX, HDX, VHX and VFD3 systems with a black plastic control module. For any BIM-compatible control boxes which contain the 3.5mm headphone jack BIM input, add part number 394194 adaptor harness.   **Earlier instrument systems with an aluminum control module are not capable of BIM connectivity\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":67611556446524,"sku":"BIM-01-2-ACES","price":133.0,"currency_code":"USD","in_stock":true}]},{"product_id":"dakota-digital-bim-efi-1-module-for-all-efi-universal-interface-holley-term-dom-sniper-1-hp-atomic-2","title":"Dakota Digital BIM-EFI-1 Module for All EFI - Universal Interface - Holley - Term - Dom- Sniper 1 - HP - Atomic 2","description":"\u003cp\u003eDakota Digital’s popular BIM interface modules for aftermarket fuel injection ECUs have been reengineered into the new BIM-EFI-1.  The BIM-EFI-1 and corresponding harness (see below) will decode the information provided by your ECU and streamline the installation of our VFD3, VHX, HDX, RTX or GRFX series of gauges by eliminating the need to duplicate some senders and sensors. The BIM-EFI-1 will also provide additional information to our gauges depending upon the configuration of your aftermarket ECU. Now with Bluetooth technology, the BIM-EFI-1 setup and programming is even easier with the use of a smart phone or device.  Bluetooth also provides the ability to have over the air software updates to ensure your BIM-EFI-1 is up to date and compatible with your fuel injection manufacturer's current software.\u003cbr\u003e\n*See below for the corresponding CAN Bus harness that will be REQUIRED in addition to the BIM-EFI-1 module.**For OEM ECU’s (J1850\/CAN) with an OBD II engine diagnostic port, please refer to the BIM-01-2**  Click here to view BIM-01-2\u003cbr\u003e\nThis product supercedes the following BIM modules: BIM-01-2-AEMBIM-01-2-EDBKBIM-01-2-FASTBIM-01-2-FTCHBIM-01-2-HALBIM-01-2-HLLYBIM-01-2-HSN2BIM-01-2-J1939BIM-01-2-MSD\u003cbr\u003e\n \u003cbr\u003e\n Harness\u003cbr\u003e\n EFI Manufacturer\u003cbr\u003e\n 394241\u003cbr\u003e\n Holley HP, Dominator, Terminator, Terminator X, Sniper 1, MSD Atomic 2\u003cbr\u003e\n 394212\u003cbr\u003e\n Holley Dominator (early versions) – special order\u003cbr\u003e\n 391205 394298\u003cbr\u003e\n Holley Sniper 2\u003cbr\u003e\n 394211\u003cbr\u003e\n FAST XFI and EZ-EFI 2.0\u003cbr\u003e\n 394210\u003cbr\u003e\n MSD Atomic 1\u003cbr\u003e\n 394238\u003cbr\u003e\n AEM and Edelbrock Pro-Flo 4\u003cbr\u003e\n 394252\u003cbr\u003e\n MegaSquirt, MaxxECU, MoTeC, and J1939 (unterminated leads)\u003cbr\u003e\n 394270\u003cbr\u003e\n Haltech\u003cbr\u003e\n 394304\u003cbr\u003e\n Aces\u003cbr\u003e\n 394287\u003cbr\u003e\n FiTech\u003cbr\u003e\n 394314\u003cbr\u003e\n HPTuners CORE\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":67611627684156,"sku":"BIM-EFI-1 + 394241","price":133.0,"currency_code":"USD","in_stock":true}]},{"product_id":"dakota-digital-bim-efi-1-module-for-all-efi-universal-interface-holley-sniper","title":"Dakota Digital BIM-EFI-1 Module for All EFI - Universal Interface - Holley Sniper","description":"\u003cp\u003eDakota Digital’s popular BIM interface modules for aftermarket fuel injection ECUs have been reengineered into the new BIM-EFI-1.  The BIM-EFI-1 and corresponding harness (see below) will decode the information provided by your ECU and streamline the installation of our VFD3, VHX, HDX, RTX or GRFX series of gauges by eliminating the need to duplicate some senders and sensors. The BIM-EFI-1 will also provide additional information to our gauges depending upon the configuration of your aftermarket ECU. Now with Bluetooth technology, the BIM-EFI-1 setup and programming is even easier with the use of a smart phone or device.  Bluetooth also provides the ability to have over the air software updates to ensure your BIM-EFI-1 is up to date and compatible with your fuel injection manufacturer's current software.\u003cbr\u003e\n*See below for the corresponding CAN Bus harness that will be REQUIRED in addition to the BIM-EFI-1 module.**For OEM ECU’s (J1850\/CAN) with an OBD II engine diagnostic port, please refer to the BIM-01-2**  Click here to view BIM-01-2\u003cbr\u003e\nThis product supercedes the following BIM modules: BIM-01-2-AEMBIM-01-2-EDBKBIM-01-2-FASTBIM-01-2-FTCHBIM-01-2-HALBIM-01-2-HLLYBIM-01-2-HSN2BIM-01-2-J1939BIM-01-2-MSD\u003cbr\u003e\n \u003cbr\u003e\n Harness\u003cbr\u003e\n EFI Manufacturer\u003cbr\u003e\n 394241\u003cbr\u003e\n Holley HP, Dominator, Terminator, Terminator X, Sniper 1, MSD Atomic 2\u003cbr\u003e\n 394212\u003cbr\u003e\n Holley Dominator (early versions) – special order\u003cbr\u003e\n 391205 394298\u003cbr\u003e\n Holley Sniper 2\u003cbr\u003e\n 394211\u003cbr\u003e\n FAST XFI and EZ-EFI 2.0\u003cbr\u003e\n 394210\u003cbr\u003e\n MSD Atomic 1\u003cbr\u003e\n 394238\u003cbr\u003e\n AEM and Edelbrock Pro-Flo 4\u003cbr\u003e\n 394252\u003cbr\u003e\n MegaSquirt, MaxxECU, MoTeC, and J1939 (unterminated leads)\u003cbr\u003e\n 394270\u003cbr\u003e\n Haltech\u003cbr\u003e\n 394304\u003cbr\u003e\n Aces\u003cbr\u003e\n 394287\u003cbr\u003e\n FiTech\u003cbr\u003e\n 394314\u003cbr\u003e\n HPTuners CORE\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":67611627880764,"sku":"BIM-EFI-1 + 391205 + 394248","price":133.0,"currency_code":"USD","in_stock":true}]},{"product_id":"dakota-digital-bim-efi-1-module-for-all-efi-universal-interface-holley-dominator-early-version-special-order","title":"Dakota Digital BIM-EFI-1 Module for All EFI - Universal Interface - Holley Dominator (Early version- special order!)","description":"\u003cp\u003eDakota Digital’s popular BIM interface modules for aftermarket fuel injection ECUs have been reengineered into the new BIM-EFI-1.  The BIM-EFI-1 and corresponding harness (see below) will decode the information provided by your ECU and streamline the installation of our VFD3, VHX, HDX, RTX or GRFX series of gauges by eliminating the need to duplicate some senders and sensors. The BIM-EFI-1 will also provide additional information to our gauges depending upon the configuration of your aftermarket ECU. Now with Bluetooth technology, the BIM-EFI-1 setup and programming is even easier with the use of a smart phone or device.  Bluetooth also provides the ability to have over the air software updates to ensure your BIM-EFI-1 is up to date and compatible with your fuel injection manufacturer's current software.\u003cbr\u003e\n*See below for the corresponding CAN Bus harness that will be REQUIRED in addition to the BIM-EFI-1 module.**For OEM ECU’s (J1850\/CAN) with an OBD II engine diagnostic port, please refer to the BIM-01-2**  Click here to view BIM-01-2\u003cbr\u003e\nThis product supercedes the following BIM modules: BIM-01-2-AEMBIM-01-2-EDBKBIM-01-2-FASTBIM-01-2-FTCHBIM-01-2-HALBIM-01-2-HLLYBIM-01-2-HSN2BIM-01-2-J1939BIM-01-2-MSD\u003cbr\u003e\n \u003cbr\u003e\n Harness\u003cbr\u003e\n EFI Manufacturer\u003cbr\u003e\n 394241\u003cbr\u003e\n Holley HP, Dominator, Terminator, Terminator X, Sniper 1, MSD Atomic 2\u003cbr\u003e\n 394212\u003cbr\u003e\n Holley Dominator (early versions) – special order\u003cbr\u003e\n 391205 394298\u003cbr\u003e\n Holley Sniper 2\u003cbr\u003e\n 394211\u003cbr\u003e\n FAST XFI and EZ-EFI 2.0\u003cbr\u003e\n 394210\u003cbr\u003e\n MSD Atomic 1\u003cbr\u003e\n 394238\u003cbr\u003e\n AEM and Edelbrock Pro-Flo 4\u003cbr\u003e\n 394252\u003cbr\u003e\n MegaSquirt, MaxxECU, MoTeC, and J1939 (unterminated leads)\u003cbr\u003e\n 394270\u003cbr\u003e\n Haltech\u003cbr\u003e\n 394304\u003cbr\u003e\n Aces\u003cbr\u003e\n 394287\u003cbr\u003e\n FiTech\u003cbr\u003e\n 394314\u003cbr\u003e\n HPTuners CORE\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":67611627979068,"sku":"BIM-EFI-1 + 394212","price":133.0,"currency_code":"USD","in_stock":true}]},{"product_id":"dakota-digital-bim-efi-1-module-for-all-efi-universal-interface-fast-xfi-ez-efi-2-0","title":"Dakota Digital BIM-EFI-1 Module for All EFI - Universal Interface - Fast XFI - EZ-EFI 2.0","description":"\u003cp\u003eDakota Digital’s popular BIM interface modules for aftermarket fuel injection ECUs have been reengineered into the new BIM-EFI-1.  The BIM-EFI-1 and corresponding harness (see below) will decode the information provided by your ECU and streamline the installation of our VFD3, VHX, HDX, RTX or GRFX series of gauges by eliminating the need to duplicate some senders and sensors. The BIM-EFI-1 will also provide additional information to our gauges depending upon the configuration of your aftermarket ECU. Now with Bluetooth technology, the BIM-EFI-1 setup and programming is even easier with the use of a smart phone or device.  Bluetooth also provides the ability to have over the air software updates to ensure your BIM-EFI-1 is up to date and compatible with your fuel injection manufacturer's current software.\u003cbr\u003e\n*See below for the corresponding CAN Bus harness that will be REQUIRED in addition to the BIM-EFI-1 module.**For OEM ECU’s (J1850\/CAN) with an OBD II engine diagnostic port, please refer to the BIM-01-2**  Click here to view BIM-01-2\u003cbr\u003e\nThis product supercedes the following BIM modules: BIM-01-2-AEMBIM-01-2-EDBKBIM-01-2-FASTBIM-01-2-FTCHBIM-01-2-HALBIM-01-2-HLLYBIM-01-2-HSN2BIM-01-2-J1939BIM-01-2-MSD\u003cbr\u003e\n \u003cbr\u003e\n Harness\u003cbr\u003e\n EFI Manufacturer\u003cbr\u003e\n 394241\u003cbr\u003e\n Holley HP, Dominator, Terminator, Terminator X, Sniper 1, MSD Atomic 2\u003cbr\u003e\n 394212\u003cbr\u003e\n Holley Dominator (early versions) – special order\u003cbr\u003e\n 391205 394298\u003cbr\u003e\n Holley Sniper 2\u003cbr\u003e\n 394211\u003cbr\u003e\n FAST XFI and EZ-EFI 2.0\u003cbr\u003e\n 394210\u003cbr\u003e\n MSD Atomic 1\u003cbr\u003e\n 394238\u003cbr\u003e\n AEM and Edelbrock Pro-Flo 4\u003cbr\u003e\n 394252\u003cbr\u003e\n MegaSquirt, MaxxECU, MoTeC, and J1939 (unterminated leads)\u003cbr\u003e\n 394270\u003cbr\u003e\n Haltech\u003cbr\u003e\n 394304\u003cbr\u003e\n Aces\u003cbr\u003e\n 394287\u003cbr\u003e\n FiTech\u003cbr\u003e\n 394314\u003cbr\u003e\n HPTuners CORE\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":67611628044604,"sku":"BIM-EFI-1 + 394211","price":133.0,"currency_code":"USD","in_stock":true}]},{"product_id":"dakota-digital-bim-efi-1-module-for-all-efi-universal-interface-msd-atomic-1","title":"Dakota Digital BIM-EFI-1 Module for All EFI - Universal Interface - MSD Atomic 1","description":"\u003cp\u003eDakota Digital’s popular BIM interface modules for aftermarket fuel injection ECUs have been reengineered into the new BIM-EFI-1.  The BIM-EFI-1 and corresponding harness (see below) will decode the information provided by your ECU and streamline the installation of our VFD3, VHX, HDX, RTX or GRFX series of gauges by eliminating the need to duplicate some senders and sensors. The BIM-EFI-1 will also provide additional information to our gauges depending upon the configuration of your aftermarket ECU. Now with Bluetooth technology, the BIM-EFI-1 setup and programming is even easier with the use of a smart phone or device.  Bluetooth also provides the ability to have over the air software updates to ensure your BIM-EFI-1 is up to date and compatible with your fuel injection manufacturer's current software.\u003cbr\u003e\n*See below for the corresponding CAN Bus harness that will be REQUIRED in addition to the BIM-EFI-1 module.**For OEM ECU’s (J1850\/CAN) with an OBD II engine diagnostic port, please refer to the BIM-01-2**  Click here to view BIM-01-2\u003cbr\u003e\nThis product supercedes the following BIM modules: BIM-01-2-AEMBIM-01-2-EDBKBIM-01-2-FASTBIM-01-2-FTCHBIM-01-2-HALBIM-01-2-HLLYBIM-01-2-HSN2BIM-01-2-J1939BIM-01-2-MSD\u003cbr\u003e\n \u003cbr\u003e\n Harness\u003cbr\u003e\n EFI Manufacturer\u003cbr\u003e\n 394241\u003cbr\u003e\n Holley HP, Dominator, Terminator, Terminator X, Sniper 1, MSD Atomic 2\u003cbr\u003e\n 394212\u003cbr\u003e\n Holley Dominator (early versions) – special order\u003cbr\u003e\n 391205 394298\u003cbr\u003e\n Holley Sniper 2\u003cbr\u003e\n 394211\u003cbr\u003e\n FAST XFI and EZ-EFI 2.0\u003cbr\u003e\n 394210\u003cbr\u003e\n MSD Atomic 1\u003cbr\u003e\n 394238\u003cbr\u003e\n AEM and Edelbrock Pro-Flo 4\u003cbr\u003e\n 394252\u003cbr\u003e\n MegaSquirt, MaxxECU, MoTeC, and J1939 (unterminated leads)\u003cbr\u003e\n 394270\u003cbr\u003e\n Haltech\u003cbr\u003e\n 394304\u003cbr\u003e\n Aces\u003cbr\u003e\n 394287\u003cbr\u003e\n FiTech\u003cbr\u003e\n 394314\u003cbr\u003e\n HPTuners CORE\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":67611628208444,"sku":"BIM-EFI-1 + 394210","price":133.0,"currency_code":"USD","in_stock":true}]},{"product_id":"dakota-digital-bim-efi-1-module-for-all-efi-universal-interface-haltech","title":"Dakota Digital BIM-EFI-1 Module for All EFI - Universal Interface - Haltech","description":"\u003cp\u003eDakota Digital’s popular BIM interface modules for aftermarket fuel injection ECUs have been reengineered into the new BIM-EFI-1.  The BIM-EFI-1 and corresponding harness (see below) will decode the information provided by your ECU and streamline the installation of our VFD3, VHX, HDX, RTX or GRFX series of gauges by eliminating the need to duplicate some senders and sensors. The BIM-EFI-1 will also provide additional information to our gauges depending upon the configuration of your aftermarket ECU. Now with Bluetooth technology, the BIM-EFI-1 setup and programming is even easier with the use of a smart phone or device.  Bluetooth also provides the ability to have over the air software updates to ensure your BIM-EFI-1 is up to date and compatible with your fuel injection manufacturer's current software.\u003cbr\u003e\n*See below for the corresponding CAN Bus harness that will be REQUIRED in addition to the BIM-EFI-1 module.**For OEM ECU’s (J1850\/CAN) with an OBD II engine diagnostic port, please refer to the BIM-01-2**  Click here to view BIM-01-2\u003cbr\u003e\nThis product supercedes the following BIM modules: BIM-01-2-AEMBIM-01-2-EDBKBIM-01-2-FASTBIM-01-2-FTCHBIM-01-2-HALBIM-01-2-HLLYBIM-01-2-HSN2BIM-01-2-J1939BIM-01-2-MSD\u003cbr\u003e\n \u003cbr\u003e\n Harness\u003cbr\u003e\n EFI Manufacturer\u003cbr\u003e\n 394241\u003cbr\u003e\n Holley HP, Dominator, Terminator, Terminator X, Sniper 1, MSD Atomic 2\u003cbr\u003e\n 394212\u003cbr\u003e\n Holley Dominator (early versions) – special order\u003cbr\u003e\n 391205 394298\u003cbr\u003e\n Holley Sniper 2\u003cbr\u003e\n 394211\u003cbr\u003e\n FAST XFI and EZ-EFI 2.0\u003cbr\u003e\n 394210\u003cbr\u003e\n MSD Atomic 1\u003cbr\u003e\n 394238\u003cbr\u003e\n AEM and Edelbrock Pro-Flo 4\u003cbr\u003e\n 394252\u003cbr\u003e\n MegaSquirt, MaxxECU, MoTeC, and J1939 (unterminated leads)\u003cbr\u003e\n 394270\u003cbr\u003e\n Haltech\u003cbr\u003e\n 394304\u003cbr\u003e\n Aces\u003cbr\u003e\n 394287\u003cbr\u003e\n FiTech\u003cbr\u003e\n 394314\u003cbr\u003e\n HPTuners CORE\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":67611628273980,"sku":"BIM-EFI-1 + 394270","price":133.0,"currency_code":"USD","in_stock":true}]},{"product_id":"dakota-digital-bim-efi-1-module-for-all-efi-universal-interface-aces-efi","title":"Dakota Digital BIM-EFI-1 Module for All EFI - Universal Interface - Aces EFI","description":"\u003cp\u003eDakota Digital’s popular BIM interface modules for aftermarket fuel injection ECUs have been reengineered into the new BIM-EFI-1.  The BIM-EFI-1 and corresponding harness (see below) will decode the information provided by your ECU and streamline the installation of our VFD3, VHX, HDX, RTX or GRFX series of gauges by eliminating the need to duplicate some senders and sensors. The BIM-EFI-1 will also provide additional information to our gauges depending upon the configuration of your aftermarket ECU. Now with Bluetooth technology, the BIM-EFI-1 setup and programming is even easier with the use of a smart phone or device.  Bluetooth also provides the ability to have over the air software updates to ensure your BIM-EFI-1 is up to date and compatible with your fuel injection manufacturer's current software.\u003cbr\u003e\n*See below for the corresponding CAN Bus harness that will be REQUIRED in addition to the BIM-EFI-1 module.**For OEM ECU’s (J1850\/CAN) with an OBD II engine diagnostic port, please refer to the BIM-01-2**  Click here to view BIM-01-2\u003cbr\u003e\nThis product supercedes the following BIM modules: BIM-01-2-AEMBIM-01-2-EDBKBIM-01-2-FASTBIM-01-2-FTCHBIM-01-2-HALBIM-01-2-HLLYBIM-01-2-HSN2BIM-01-2-J1939BIM-01-2-MSD\u003cbr\u003e\n \u003cbr\u003e\n Harness\u003cbr\u003e\n EFI Manufacturer\u003cbr\u003e\n 394241\u003cbr\u003e\n Holley HP, Dominator, Terminator, Terminator X, Sniper 1, MSD Atomic 2\u003cbr\u003e\n 394212\u003cbr\u003e\n Holley Dominator (early versions) – special order\u003cbr\u003e\n 391205 394298\u003cbr\u003e\n Holley Sniper 2\u003cbr\u003e\n 394211\u003cbr\u003e\n FAST XFI and EZ-EFI 2.0\u003cbr\u003e\n 394210\u003cbr\u003e\n MSD Atomic 1\u003cbr\u003e\n 394238\u003cbr\u003e\n AEM and Edelbrock Pro-Flo 4\u003cbr\u003e\n 394252\u003cbr\u003e\n MegaSquirt, MaxxECU, MoTeC, and J1939 (unterminated leads)\u003cbr\u003e\n 394270\u003cbr\u003e\n Haltech\u003cbr\u003e\n 394304\u003cbr\u003e\n Aces\u003cbr\u003e\n 394287\u003cbr\u003e\n FiTech\u003cbr\u003e\n 394314\u003cbr\u003e\n HPTuners CORE\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":67611628372284,"sku":"BIM-EFI-1 + 394304","price":133.0,"currency_code":"USD","in_stock":true}]},{"product_id":"dakota-digital-bim-efi-1-module-for-all-efi-universal-interface-fitech-efi","title":"Dakota Digital BIM-EFI-1 Module for All EFI - Universal Interface - FiTech EFI","description":"\u003cp\u003eDakota Digital’s popular BIM interface modules for aftermarket fuel injection ECUs have been reengineered into the new BIM-EFI-1.  The BIM-EFI-1 and corresponding harness (see below) will decode the information provided by your ECU and streamline the installation of our VFD3, VHX, HDX, RTX or GRFX series of gauges by eliminating the need to duplicate some senders and sensors. The BIM-EFI-1 will also provide additional information to our gauges depending upon the configuration of your aftermarket ECU. Now with Bluetooth technology, the BIM-EFI-1 setup and programming is even easier with the use of a smart phone or device.  Bluetooth also provides the ability to have over the air software updates to ensure your BIM-EFI-1 is up to date and compatible with your fuel injection manufacturer's current software.\u003cbr\u003e\n*See below for the corresponding CAN Bus harness that will be REQUIRED in addition to the BIM-EFI-1 module.**For OEM ECU’s (J1850\/CAN) with an OBD II engine diagnostic port, please refer to the BIM-01-2**  Click here to view BIM-01-2\u003cbr\u003e\nThis product supercedes the following BIM modules: BIM-01-2-AEMBIM-01-2-EDBKBIM-01-2-FASTBIM-01-2-FTCHBIM-01-2-HALBIM-01-2-HLLYBIM-01-2-HSN2BIM-01-2-J1939BIM-01-2-MSD\u003cbr\u003e\n \u003cbr\u003e\n Harness\u003cbr\u003e\n EFI Manufacturer\u003cbr\u003e\n 394241\u003cbr\u003e\n Holley HP, Dominator, Terminator, Terminator X, Sniper 1, MSD Atomic 2\u003cbr\u003e\n 394212\u003cbr\u003e\n Holley Dominator (early versions) – special order\u003cbr\u003e\n 391205 394298\u003cbr\u003e\n Holley Sniper 2\u003cbr\u003e\n 394211\u003cbr\u003e\n FAST XFI and EZ-EFI 2.0\u003cbr\u003e\n 394210\u003cbr\u003e\n MSD Atomic 1\u003cbr\u003e\n 394238\u003cbr\u003e\n AEM and Edelbrock Pro-Flo 4\u003cbr\u003e\n 394252\u003cbr\u003e\n MegaSquirt, MaxxECU, MoTeC, and J1939 (unterminated leads)\u003cbr\u003e\n 394270\u003cbr\u003e\n Haltech\u003cbr\u003e\n 394304\u003cbr\u003e\n Aces\u003cbr\u003e\n 394287\u003cbr\u003e\n FiTech\u003cbr\u003e\n 394314\u003cbr\u003e\n HPTuners CORE\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":67611628437820,"sku":"BIM-EFI-1 + 394287","price":133.0,"currency_code":"USD","in_stock":true}]},{"product_id":"dakota-digital-bim-efi-1-module-for-all-efi-universal-interface-hptuners-core","title":"Dakota Digital BIM-EFI-1 Module for All EFI - Universal Interface - HPTuners CORE","description":"\u003cp\u003eDakota Digital’s popular BIM interface modules for aftermarket fuel injection ECUs have been reengineered into the new BIM-EFI-1.  The BIM-EFI-1 and corresponding harness (see below) will decode the information provided by your ECU and streamline the installation of our VFD3, VHX, HDX, RTX or GRFX series of gauges by eliminating the need to duplicate some senders and sensors. The BIM-EFI-1 will also provide additional information to our gauges depending upon the configuration of your aftermarket ECU. Now with Bluetooth technology, the BIM-EFI-1 setup and programming is even easier with the use of a smart phone or device.  Bluetooth also provides the ability to have over the air software updates to ensure your BIM-EFI-1 is up to date and compatible with your fuel injection manufacturer's current software.\u003cbr\u003e\n*See below for the corresponding CAN Bus harness that will be REQUIRED in addition to the BIM-EFI-1 module.**For OEM ECU’s (J1850\/CAN) with an OBD II engine diagnostic port, please refer to the BIM-01-2**  Click here to view BIM-01-2\u003cbr\u003e\nThis product supercedes the following BIM modules: BIM-01-2-AEMBIM-01-2-EDBKBIM-01-2-FASTBIM-01-2-FTCHBIM-01-2-HALBIM-01-2-HLLYBIM-01-2-HSN2BIM-01-2-J1939BIM-01-2-MSD\u003cbr\u003e\n \u003cbr\u003e\n Harness\u003cbr\u003e\n EFI Manufacturer\u003cbr\u003e\n 394241\u003cbr\u003e\n Holley HP, Dominator, Terminator, Terminator X, Sniper 1, MSD Atomic 2\u003cbr\u003e\n 394212\u003cbr\u003e\n Holley Dominator (early versions) – special order\u003cbr\u003e\n 391205 394298\u003cbr\u003e\n Holley Sniper 2\u003cbr\u003e\n 394211\u003cbr\u003e\n FAST XFI and EZ-EFI 2.0\u003cbr\u003e\n 394210\u003cbr\u003e\n MSD Atomic 1\u003cbr\u003e\n 394238\u003cbr\u003e\n AEM and Edelbrock Pro-Flo 4\u003cbr\u003e\n 394252\u003cbr\u003e\n MegaSquirt, MaxxECU, MoTeC, and J1939 (unterminated leads)\u003cbr\u003e\n 394270\u003cbr\u003e\n Haltech\u003cbr\u003e\n 394304\u003cbr\u003e\n Aces\u003cbr\u003e\n 394287\u003cbr\u003e\n FiTech\u003cbr\u003e\n 394314\u003cbr\u003e\n HPTuners CORE\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":67611628601660,"sku":"BIM-EFI-1 + 394314","price":133.0,"currency_code":"USD","in_stock":true}]},{"product_id":"dakota-digital-bim-efi-1-module-for-all-efi-universal-interface-megasquirt-maxxecu-motec-j1939","title":"Dakota Digital BIM-EFI-1 Module for All EFI - Universal Interface - MegaSquirt - MaxxECU - Motec - J1939","description":"\u003cp\u003eDakota Digital’s popular BIM interface modules for aftermarket fuel injection ECUs have been reengineered into the new BIM-EFI-1.  The BIM-EFI-1 and corresponding harness (see below) will decode the information provided by your ECU and streamline the installation of our VFD3, VHX, HDX, RTX or GRFX series of gauges by eliminating the need to duplicate some senders and sensors. The BIM-EFI-1 will also provide additional information to our gauges depending upon the configuration of your aftermarket ECU. Now with Bluetooth technology, the BIM-EFI-1 setup and programming is even easier with the use of a smart phone or device.  Bluetooth also provides the ability to have over the air software updates to ensure your BIM-EFI-1 is up to date and compatible with your fuel injection manufacturer's current software.\u003cbr\u003e\n*See below for the corresponding CAN Bus harness that will be REQUIRED in addition to the BIM-EFI-1 module.**For OEM ECU’s (J1850\/CAN) with an OBD II engine diagnostic port, please refer to the BIM-01-2**  Click here to view BIM-01-2\u003cbr\u003e\nThis product supercedes the following BIM modules: BIM-01-2-AEMBIM-01-2-EDBKBIM-01-2-FASTBIM-01-2-FTCHBIM-01-2-HALBIM-01-2-HLLYBIM-01-2-HSN2BIM-01-2-J1939BIM-01-2-MSD\u003cbr\u003e\n \u003cbr\u003e\n Harness\u003cbr\u003e\n EFI Manufacturer\u003cbr\u003e\n 394241\u003cbr\u003e\n Holley HP, Dominator, Terminator, Terminator X, Sniper 1, MSD Atomic 2\u003cbr\u003e\n 394212\u003cbr\u003e\n Holley Dominator (early versions) – special order\u003cbr\u003e\n 391205 394298\u003cbr\u003e\n Holley Sniper 2\u003cbr\u003e\n 394211\u003cbr\u003e\n FAST XFI and EZ-EFI 2.0\u003cbr\u003e\n 394210\u003cbr\u003e\n MSD Atomic 1\u003cbr\u003e\n 394238\u003cbr\u003e\n AEM and Edelbrock Pro-Flo 4\u003cbr\u003e\n 394252\u003cbr\u003e\n MegaSquirt, MaxxECU, MoTeC, and J1939 (unterminated leads)\u003cbr\u003e\n 394270\u003cbr\u003e\n Haltech\u003cbr\u003e\n 394304\u003cbr\u003e\n Aces\u003cbr\u003e\n 394287\u003cbr\u003e\n FiTech\u003cbr\u003e\n 394314\u003cbr\u003e\n HPTuners CORE\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":67611628798268,"sku":"BIM-EFI-1 + 394252","price":133.0,"currency_code":"USD","in_stock":true}]},{"product_id":"dakota-digital-bim-efi-1-module-for-all-efi-universal-interface-aem-edelbrock-pro-flo-4","title":"Dakota Digital BIM-EFI-1 Module for All EFI - Universal Interface - AEM - Edelbrock Pro-Flo 4","description":"\u003cp\u003eDakota Digital’s popular BIM interface modules for aftermarket fuel injection ECUs have been reengineered into the new BIM-EFI-1.  The BIM-EFI-1 and corresponding harness (see below) will decode the information provided by your ECU and streamline the installation of our VFD3, VHX, HDX, RTX or GRFX series of gauges by eliminating the need to duplicate some senders and sensors. The BIM-EFI-1 will also provide additional information to our gauges depending upon the configuration of your aftermarket ECU. Now with Bluetooth technology, the BIM-EFI-1 setup and programming is even easier with the use of a smart phone or device.  Bluetooth also provides the ability to have over the air software updates to ensure your BIM-EFI-1 is up to date and compatible with your fuel injection manufacturer's current software.\u003cbr\u003e\n*See below for the corresponding CAN Bus harness that will be REQUIRED in addition to the BIM-EFI-1 module.**For OEM ECU’s (J1850\/CAN) with an OBD II engine diagnostic port, please refer to the BIM-01-2**  Click here to view BIM-01-2\u003cbr\u003e\nThis product supercedes the following BIM modules: BIM-01-2-AEMBIM-01-2-EDBKBIM-01-2-FASTBIM-01-2-FTCHBIM-01-2-HALBIM-01-2-HLLYBIM-01-2-HSN2BIM-01-2-J1939BIM-01-2-MSD\u003cbr\u003e\n \u003cbr\u003e\n Harness\u003cbr\u003e\n EFI Manufacturer\u003cbr\u003e\n 394241\u003cbr\u003e\n Holley HP, Dominator, Terminator, Terminator X, Sniper 1, MSD Atomic 2\u003cbr\u003e\n 394212\u003cbr\u003e\n Holley Dominator (early versions) – special order\u003cbr\u003e\n 391205 394298\u003cbr\u003e\n Holley Sniper 2\u003cbr\u003e\n 394211\u003cbr\u003e\n FAST XFI and EZ-EFI 2.0\u003cbr\u003e\n 394210\u003cbr\u003e\n MSD Atomic 1\u003cbr\u003e\n 394238\u003cbr\u003e\n AEM and Edelbrock Pro-Flo 4\u003cbr\u003e\n 394252\u003cbr\u003e\n MegaSquirt, MaxxECU, MoTeC, and J1939 (unterminated leads)\u003cbr\u003e\n 394270\u003cbr\u003e\n Haltech\u003cbr\u003e\n 394304\u003cbr\u003e\n Aces\u003cbr\u003e\n 394287\u003cbr\u003e\n FiTech\u003cbr\u003e\n 394314\u003cbr\u003e\n HPTuners CORE\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":67611629093180,"sku":"BIM-EFI-1 + 394238","price":133.0,"currency_code":"USD","in_stock":true}]}],"url":"https:\/\/specbuiltls.com\/collections\/expansion-module.oembed","provider":"My Store","version":"1.0","type":"link"}